RAYTRONIC C10 Mini 60W is a small universal charger with mains power supply with simple operation for home charging of all types of batteries. The C10 Mini allows charging and discharging of common types of cells (NiCd, NiMH, Li-poly, Li-ion, Li-Fe, LiHV, Pb), in addition it is equipped with a built-in four-channel balancer, which ensures very safe and comfortable charging of lithium batteries.
Mains supply 100-240 V / 50-60 Hz
For charging and discharging 6-8 NiCd / NiMH cells, 2-4 Li-ion / Li-poly / Li-Fe / LiHV cells or 6-12 V lead-acid batteries
Adjustable charging current (0.1 A - 6.0 A)
Adjustable discharge current (0.1 A - 2.0 A)
Max. power for charging 60 W, for discharging 10 W
Automatic charging and discharging mode for NiCd, NiMH with adjustable current limit
Completion of charging using delta-peak automation for NiCd and NiMH batteries
Lithium and Pb batteries are charged using the "constant current / constant voltage" method
Adjustable sensitivity of delta-peak detection for NiCd and NiMH batteries
Adjustable end voltage for charging and discharging for lithium batteries
Repeated cyclic operation of charging / discharging or discharging / charging for NiCd and NiMH batteries, up to 5 cycles
Four charging modes for lithium batteries - normal charging, fast charging, balancing charging and storage charging / discharging. The last two modes require the connection of the service connector of the balancing set, in other modes it can be charged with or without a balancer.
Stop charging when the set time, supplied charge or limit temperature is exceeded.
Memory for 5 charging / discharging programs for each type of batteries.
Measurement of the total voltage of the set and individual cells (for lithium batteries).
Measurement of the total internal resistance of the set and individual cells (for lithium batteries).
Socket for temperature sensor.
XT60 charger output socket.
Two-line backlit LCD display with simple and clear menu and display of parameters during charging / discharging
A number of warning text messages contribute to safe operation - incorrect input voltage, incorrect connection, unsuitable battery or its condition, incorrect polarity at the output
Reverse polarity and short circuit protection at the output.
Compact plastic case, small dimensions
Built-in fan for forced cooling
Built-in power supply.
The charger is equipped with an XT60 output socket and a universal socket for JST-XH service connectors allowing direct connection of battery power cables and JST-XH service connectors of 2-6S kits - if you use kits with XT60 and JST-XH connectors, you can do without charging cables and adapters. You can use standard Sky RC or RC System adapters to connect the service connectors of other systems, in which you cut off part of the output connector with contacts for the 5th and 6th channel.
You can purchase a temperature sensor to measure the temperature of rechargeable / discharged batteries.
Note: The charger uses a final voltage of 2.40 V / cell when charging lead-acid batteries - for this reason it is suitable for charging classic lead-acid batteries (car batteries) and gel batteries with a reversible valve. It is not suitable for charging gas-tight gel batteries, which must not be charged to more than 2.30 V / cell.
The charger set includes: RAYTRONIC C10 Mini charger, mains cable, instructions.
Input voltage (mains - AC) [V] 100 - 240
Charging current [A] 0.1 - 6
Charging power [W] 60
Discharge current [A] 0.1 - 2
Discharge power [W] 10
Number of channels 1
NiCd [art.] 6 - 8
NiMH [Art.] 6 - 8
Li-Pol [Art.] 2 - 4
Li-Ion [Art.] 2 - 4
Li-Fe [Art.] 2 - 4
Li-HV [Art.] 2 - 4
Pb [Art.] 3 - 6
Balancer current [mA] 300
Length [mm] 115
Width [mm] 112
Height [mm] 55
Weight [g] 302